The BF-189 Hangin is a Damascus skeleton handle balisong. The handles are satin finished stainless steel with a row of round holes down each one, and the blade is an etched drop point.
Ask anyone to draw a butterfly knife and they will draw these handles. The blade is where the Hangin stops following the drawing.
The handle everyone already knows
Two lengths of stainless steel, each drilled with a line of round holes, held shut by a latch at the bottom. This is the picture in most heads when the words butterfly knife come up, and it got there honestly.
The satin finish is a fine brushed surface that sits somewhere between a mirror polish and bare ground steel. It hides fingerprints and small scuffs far better than a polished handle does, which matters on a knife that spends its working life being thrown around a hand.
What the holes do to the flip
The holes are partly for looks. Mostly they are steel that is no longer there, so these handles weigh less than solid ones of the same size. Lighter handles shift the balance toward the blade and the pivots. In the hand that means the knife comes around quickly and stops when you ask it to, with less mass at the far end trying to carry on without you.
Some people like heavy handles that swing slowly and carry themselves through a rollover. That is a fair preference and this is not that knife. Hangin is the Tagalog word for wind, which is about right.
|
Skeleton handles |
Solid handles |
| Weight in the handles |
Lower |
Higher |
| Feel in a flip |
Quick and easy to stop |
Slower, carries momentum |
| Grip |
Hole edges give the fingers something to find |
Smooth unless textured |
| Cleaning |
Lint is easy to see and blow out |
Dirt can sit unseen |
Pattern where the plain steel usually goes
Damascus does not cut better than a good plain steel, and we would rather say so here than have you find out later. It is made by forge welding different steels into one billet, folding it, drawing it out and grinding the blade to shape. Then it goes into acid. The acid bites each steel at a different rate, and the layers come up as light and dark lines. Because the pattern runs through the whole blade, sharpening does not wear it away.
What it does on this knife is give the eye one place to go. Plain satin handles are about as neutral as a frame gets, so the etched steel has no competition. The shape is a drop point, where the spine curves gently down to meet the tip. That leaves a strong point and a useful length of curved edge. It is the sensible shape, and it gets through most jobs without complaint.
The blade is hardened to 58-60 HRC, hard enough to hold an edge and not so hard that it chips at the first excuse. Etched steel prefers to be dry, so wipe it after handling and give it a drop of oil now and then.
Specifications for this Damascus skeleton handle balisong
| Overall length |
24 cm |
| Blade length |
12 cm |
| Blade |
Damascus steel, etched, drop point |
| Hardness |
58-60 HRC |
| Handle |
Stainless steel skeleton handles with round holes, satin finish, latch |
| Sheath |
Fitted black leather, included |
Ordering the BF-189
The Hangin is sharpened, tuned and checked by hand before it goes anywhere. It comes with a fitted black leather sheath and a gift box.
If you would like to learn the basics without paying in blood, order it as a Trainer. Same knife, blunt unsharpened edge, same price. Engraving is chosen on the product page, $19 for text and $29 for a logo. Shipping is free inside the United States and a flat $49 worldwide.
The Hangin sits with our other handmade Filipino balisong in the Damascus collection. If tang pins and bite handles are new to you, the balisong anatomy guide names every part, and the trainer guide makes the case for a blunt first knife. Prefer different handles or another blade shape? That is what the custom builder is for.
Reviews
There are no reviews yet.