Hangin Handmade Damascus Steel Filipino Balisong Butterfly Knife | Stainless Steel Skeleton Handle and Leather Sheath BF-189

Save $32.99, 11% offWorld Kindness Day Sale, 11% off everythingBuy 2 knives, get a free mystery butterfly knife, $100 valueSpend $300, get an extra 15% offHandmade in Austin, TXFree US shippingShips worldwide with trackingHand tuned before shippingSharp or trainer bladeEngraving available
SteelDamascus steel, etched, drop pointHandleStainless steel skeleton handles, satinOverall24 cmBlade12 cmSheathFitted leather, included

Original price was: $299.95.Current price is: $266.96.

The drilled steel handles everyone pictures when they hear butterfly knife, with an etched Damascus blade where the plain one usually goes. The holes are there to take weight out, and you can feel it.

Blade Material – Damascus steel, etched, drop point
Handle Material – Stainless steel skeleton handles, satin finish
Overall Length – 24 cm
Blade Length – 12 cm
Hardness – 58-60 HRC
Sheath – Fitted leather, included

Handmade in Austin, TX. Ships Worldwide.

Every knife is built by hand in our workshop in Austin, Texas, by Filipino makers trained in the Batangas tradition. We ship to any country we are allowed to send a knife to. Free shipping inside the United States, 49 USD flat everywhere else. Shipping and delivery times

Hand tuned and shipped from Austin, TX. Free shipping inside the USA.
Offers available right now11% off everythingWorld kindness day sale ends November 16. The sale price is already on this product, no code needed.
  • Buy 2 knives, get a free mystery butterfly knife, $100 value
  • Spend $300, get an extra 15% off
Choose your blade

Not sure which one you want? Read the trainer guide.

Choose assembly
Personalise this knife

Engraving is cut into the bolster and is permanent, so engraved knives are final sale. It adds 1 to 3 business days.

0/20 characters
Please type the text you would like engraved.

You upload your logo file on the checkout page, right below the order notes. JPG, PNG, WEBP, GIF or PDF, up to 10 MB. As soon as the file reaches us we cut it and your knife goes into production.

Add to Wishlist
Add to Wishlist

Not quite what you want?

Pick your own blade, steel and handle in our custom balisong builder.

Design Your Own Balisong
Ships in 1 to 3 business days
Fitted leather sheath included
Hand-tuned before shipping
Worldwide with tracking

Buy together

Take the set

Two more knives from the bench, picked to sit alongside this one.

Hangin balisong butterfly knife held in handOne knife from the Set of 6 Perlas balisong butterfly knives held in handBarn Owl balisong butterfly knife held in hand, third view

Total price: -

Engraving is chosen on each knife own product page, so knives added here go in without engraving.

Description

The BF-189 Hangin is a Damascus skeleton handle balisong. The handles are satin finished stainless steel with a row of round holes down each one, and the blade is an etched drop point.

Ask anyone to draw a butterfly knife and they will draw these handles. The blade is where the Hangin stops following the drawing.

The handle everyone already knows

Two lengths of stainless steel, each drilled with a line of round holes, held shut by a latch at the bottom. This is the picture in most heads when the words butterfly knife come up, and it got there honestly.

The satin finish is a fine brushed surface that sits somewhere between a mirror polish and bare ground steel. It hides fingerprints and small scuffs far better than a polished handle does, which matters on a knife that spends its working life being thrown around a hand.

What the holes do to the flip

The holes are partly for looks. Mostly they are steel that is no longer there, so these handles weigh less than solid ones of the same size. Lighter handles shift the balance toward the blade and the pivots. In the hand that means the knife comes around quickly and stops when you ask it to, with less mass at the far end trying to carry on without you.

Some people like heavy handles that swing slowly and carry themselves through a rollover. That is a fair preference and this is not that knife. Hangin is the Tagalog word for wind, which is about right.

Skeleton handles Solid handles
Weight in the handles Lower Higher
Feel in a flip Quick and easy to stop Slower, carries momentum
Grip Hole edges give the fingers something to find Smooth unless textured
Cleaning Lint is easy to see and blow out Dirt can sit unseen

Pattern where the plain steel usually goes

Damascus does not cut better than a good plain steel, and we would rather say so here than have you find out later. It is made by forge welding different steels into one billet, folding it, drawing it out and grinding the blade to shape. Then it goes into acid. The acid bites each steel at a different rate, and the layers come up as light and dark lines. Because the pattern runs through the whole blade, sharpening does not wear it away.

What it does on this knife is give the eye one place to go. Plain satin handles are about as neutral as a frame gets, so the etched steel has no competition. The shape is a drop point, where the spine curves gently down to meet the tip. That leaves a strong point and a useful length of curved edge. It is the sensible shape, and it gets through most jobs without complaint.

The blade is hardened to 58-60 HRC, hard enough to hold an edge and not so hard that it chips at the first excuse. Etched steel prefers to be dry, so wipe it after handling and give it a drop of oil now and then.

Specifications for this Damascus skeleton handle balisong

Overall length 24 cm
Blade length 12 cm
Blade Damascus steel, etched, drop point
Hardness 58-60 HRC
Handle Stainless steel skeleton handles with round holes, satin finish, latch
Sheath Fitted black leather, included

Ordering the BF-189

The Hangin is sharpened, tuned and checked by hand before it goes anywhere. It comes with a fitted black leather sheath and a gift box.

If you would like to learn the basics without paying in blood, order it as a Trainer. Same knife, blunt unsharpened edge, same price. Engraving is chosen on the product page, $19 for text and $29 for a logo. Shipping is free inside the United States and a flat $49 worldwide.

The Hangin sits with our other handmade Filipino balisong in the Damascus collection. If tang pins and bite handles are new to you, the balisong anatomy guide names every part, and the trainer guide makes the case for a blunt first knife. Prefer different handles or another blade shape? That is what the custom builder is for.

Shipping & Delivery

Every knife is checked for lockup, pivot action and edge before it goes in the box. Nothing ships that we would not keep for ourselves.

Processing

Most orders leave the bench in 1 to 3 business days. If the knife you picked is not in stock we forge it for you, which takes roughly 2 to 3 weeks. Engraving adds a little time on top of that.

What shipping costs

  • United States: free on every order.
  • Everywhere else: a flat 49 dollars for the whole order, however many knives are in it, so two at once ship for the same as one.

How long it takes

  • USA: 4 to 8 business days
  • International: 8 to 14 business days, longer if customs takes an interest

Those are carrier estimates, not promises we can enforce.

Tracking

A tracking number reaches you by email as soon as the parcel is collected. Carriers often take 24 to 48 hours to start showing movement, so a quiet first day is normal.

Customs and local law

Import duty, VAT and customs fees are set by your own country and are yours to pay. Balisong law varies by country and by US state, so it is worth checking yours before you order.

The full detail lives on Order and Shipping and Return or Exchange.

Hand-forged in the Batangas tradition

The balisong was born in Batangas, Philippines. Every knife in this catalogue is made by Filipino artisans and metalworkers, many from families with generations of experience, now working in the United States. Blades are ground from 440C stainless, D2 tool steel, VG10, high carbon and Damascus, and fitted to handles of kamagong ebony, carabao horn, Philippine deer horn and bone.

Craftsman hands checking blade alignment and pivot action on a finished butterfly knife

Checked four times

Detailed hand inspection, smoothness and pivot testing, blade alignment checks, and durability and finish quality control. If a knife doesn't meet our standards, it never reaches our customers.

Engraving available

Initials or short text $19 in the font you choose, a custom logo $29. Select it above Add to Cart and upload the logo file at checkout.

A sheath with every knife

Every knife includes a fitted leather sheath. Both live blades and trainers are offered, and every order ships worldwide with tracking.

Buying more than one?

Trade pricing starts at ten pieces and reaches 45% under retail at volume, with your logo on the bolster. See wholesale and bulk, or design one from scratch.

Owner reviews

What owners say

No reviews on this knife yet. If you own it, yours would be the first.

Reviews

There are no reviews yet.

Be the first to review “Hangin Handmade Damascus Steel Filipino Balisong Butterfly Knife | Stainless Steel Skeleton Handle and Leather Sheath BF-189”

Your email address will not be published. Required fields are marked *

Quick phrases

Pick a star rating above and tap any phrase to add it to your review. Tap again to remove it.

Shipping and returns

Processing

Most orders ship in 1 to 3 business days.

USA delivery

4 to 8 business days, tracked door to door.

International

8 to 14 business days. Customs times vary by country.

Made to order

Out of stock pieces are handcrafted for you in 2 to 3 weeks.