High Carbon Steel blade
Let us be straightforward, because plenty of sellers are not. A plain high carbon blade will change colour, and if you neglect it, it will rust. That is not a fault in the steel. It is the steel.
Two different things get confused here. Patina is a stable grey-blue oxide that forms as the blade is used, and it is protective. It is the mottled look on an old kitchen knife, and experienced owners encourage it. Rust is orange, it flakes, and it eats pits into the steel. Patina prevents rust. Rust is what happens where patina never formed because the blade sat wet.
The care is not demanding: wipe it dry after handling, oil it lightly now and then, and never put it away damp in a leather sheath. Do that and the blade darkens attractively for thirty years.
Note that this shelf of 89 is the wider high carbon family and includes our 440C and D2 blades, which resist corrosion far better. The plain carbon knives, the ones this applies to fully, are the BF-56 to BF-77 series at $121.55 to $139.70.
Showing 1–24 of 108 results
Amihan Filipino Traditional Series D2 Steel Beautiful Butterfly Balisong Knife USA Made With Rose Wood Handle BF-99
Blade Materials – D2 Steel
Handle Materials – Brass with Rose Wood
Overall Length – 24cm
Blade Length -12cm
Weight – 200g
Antelope Handmade 440C Stainless Steel Original Filipino Balisong Butterfly Knife with Brass and Philippine Deer Horn Handle | 24cm EDC Flipper Gift for Him | BF-06
Blade Materials – 440c Stainless Steel
Handle Materials – Brass with Philippine Deer Horn Inserts
Overall Length – 24cm
Blade Length -12cm
Weight -250g
Apoy Handmade Balisong Kitchen Chef Knife | Forge Finished High Carbon Steel | Stag Handle with Leather Sheath BF-165
The black on this blade is not a coating. It is what the forge left behind, and we ground the edge bevel bright so you can see exactly where one ends and the other begins.
Blade Material – High Carbon Steel, forge finish with polished bevel
Handle Material – Stag with steel bolsters
Overall Length – 30.5 cm (12 in)
Blade Length – 18 cm (7 in)
Hardness – 58-60 HRC
Sheath – Fitted leather, included
Argentine Ant Handmade 440C Stainless Steel Original Filipino Balisong Butterfly Knife with Stainless Steel and Carabao Horn Handle | 22cm EDC Flipper Gift for Him | BF-02
Blade Materials – 440c stainless Steel
Handle Materials – Stainless Steel with Carabao Horn Inserts
Overall Length – 22cm
Blade Length -11cm
Weight – 175g
Asian Palm Civet Handmade 440C Stainless Steel Original Filipino Balisong Butterfly Knife with Brass and Carabao Horn Handle | 24cm Lightweight Flipper Gift | BF-08
The Asian Palm Civet lends its name to this balisong, built with corrosion-resistant 440c stainless steel and genuine carabao horn.
Blade Materials – 440c stainless steel
Handle Materials – Brass with Carabao Horn Inserts
Overall Length – 24cm
Blade Length -12cm
Weight – 165g
Aurochs Handmade 440C Stainless Steel Original Filipino Balisong Butterfly Knife with Stainless Steel and Kamagong Wood Handle | 24cm EDC Flipper Gift for Him | BF-09
Blade Materials – 440c Stainless steel
Handle Materials – Stainless Steel with Kamagong Wood Inserts
Overall Length – 24cm
Blade Length -12cm
Weight – 175g
Baga Handmade Balisong Kitchen Chef Knife | Forge Finished High Carbon Steel | Stag Handle with Copper Bolsters and Leather Sheath BF-172
Same forged blade as the BF-165, but the bolsters are copper, and copper is the one metal on a knife that is supposed to change colour.
Blade Material – High Carbon Steel, forge finish with polished bevel
Handle Material – Stag with copper bolsters
Overall Length – 30.5 cm (12 in)
Blade Length – 18 cm (7 in)
Hardness – 58-60 HRC
Sheath – Fitted leather, included
Bagani Filipino Traditional D2 Steel Beautiful Dagger Blade Butterfly Balisong Knife USA Made Gift For Him With Rose Wood Handle BF-111
The Dagger Blade variant of our Filipino Traditional line adds a symmetrical double-edged profile to the same D2 steel, rosewood-handled build.
Blade Materials – D2 Tool Steel
Handle Materials – Brass with rose Wood
Overall Length – 24cm
Blade Length -12cm
Weight – 220g
Bagwis Filipino Traditional Series D2 Steel Beautiful Tanto Blade Butterfly Balisong Knife USA Made With Rose Wood Handle BF-100
A tanto point is a flat grind meeting a short angled tip, which makes it the sturdiest tip geometry in the traditional series.
Blade Materials – D2 Tool Steel
Handle Materials – Brass with Rose Wood
Overall Length – 24cm
Blade Length -12cm
Weight – 200g
Bagyo Handmade Karambit Balisong Butterfly Knife | Satin Polished High Carbon Steel | Buffalo Horn and Bone Handle with Brass Frame and Leather Sheath BF-181
Black horn and pale bone alternating down a brass channel, with a brass ring at the butt. This is the oldest way of building a balisong handle, put on the newest shape in the range.
Blade Material – High Carbon Steel, satin polished
Handle Material – Buffalo Horn with bone spacers in a brass frame, brass finger ring
Overall Length – 24 cm
Blade Length – 12 cm
Hardness – 58-60 HRC
Sheath – Fitted leather, included
Balete Philippine Visayan D2 Steel Blade Butterfly Balisong Knife USA Made Gift For Him With Stag Horn Handle BF-122
Collectors reach for the BF-122 because it is the real thing: handmade start to finish in the Visayan style, with Philippine stag horn on the handles.
Blade Materials – D2 Tool Steel
Handle Materials – Brass with stag horn
Overall Length – 29cm
Blade Length -14cm
Weight – 200g
Banded Sugar Ant Handmade 440C Stainless Steel Original Filipino Balisong Butterfly Knife with Brass and Philippine Deer Horn Handle | 29cm Full Size Collector Gift | BF-04
Blade Materials – 440c Stainless Steel
Handle Materials – Brass with Philippine Deer Horn Inserts
Overall Length – 29cm
Blade Length -14cm
Weight -310g
Barb Handmade 440C Stainless Steel Original Filipino Balisong Butterfly Knife with Brass and Kamagong Wood Handle | 24cm EDC Flipper Gift for Him | BF-10
Blade Materials – 440c Stainless Steel
Handle Materials – Brass with Kamagong Wood Inserts
Overall Length – 24cm
Blade Length -12cm
Weight – 195g
Barn Owl Handmade 440C Stainless Steel Original Filipino Balisong Butterfly Knife with Brass and Kamagong Wood Handle | 24cm Lightweight Flipper Gift | BF-11
Blade Materials – 440c Stainless steel
Handle Materials – Brass with Kamagong Wood Inserts
Overall Length – 24cm
Blade Length -12cm
Weight – 165g
Bear Handmade 440C Stainless Steel Original Filipino Balisong Butterfly Knife with Brass and Kamagong Wood Handle | 24cm EDC Flipper Gift for Him | BF-13
Blade Materials – 440c Stainless steel
Handle Materials – Brass with Kamagong Wood Inserts
Overall Length – 24cm
Blade Length -12cm
Weight – 175g
Beetle Handmade 440C Stainless Steel Original Filipino Balisong Butterfly Knife with Brass and Kamagong Wood Handle | 24cm EDC Flipper Gift for Him | BF-14
A 175g 440c flipper with brass bolsters and kamagong inlays: the compact end of the Beetle line.
Blade Materials – 440c Stainless steel
Handle Materials – Brass with Kamagong Wood Inserts
Overall Length – 24cm
Blade Length -12cm
Weight – 175g
Bird Handmade 440C Stainless Steel Original Filipino Balisong Butterfly Knife with Brass and Bone Handle | 24cm EDC Flipper Gift for Him | BF-16
Blade Materials – 440c Stainless steel
Handle Materials – Brass with Bone Inserts
Overall Length – 24cm
Blade Length -12cm
Weight – 175g
Black Widow Spider Handmade 440C Stainless Steel Original Filipino Balisong Butterfly Knife with Brass and Carabao Horn Handle | 24cm Lightweight Flipper Gift | BF-17
The Black Widow Spider inspires this balisong's name, pairing sharp 440c stainless steel with a carabao horn handle for striking presence.
Blade Materials – 440c Stainless steel
Handle Materials – Brass with Carabao Horn Inserts
Overall Length – 24cm
Blade Length -12cm
Weight – 165g
Bullet Ant Handmade 440C Stainless Steel Original Filipino Balisong Butterfly Knife with Stainless Steel and Philippine Deer Horn Handle | 29cm Full Size Collector Gift | BF-01
Blade Materials – 440c Stainless steel
Handle Materials – Stainless Steel with Philippine Deer Horn Inserts
Overall Length – 29cm
Blade Length -14cm
Weight -210g
Bumblebee Handmade 440C Stainless Steel Original Filipino Balisong Butterfly Knife with Brass and Carabao Horn Handle | 24cm EDC Flipper Gift for Him | BF-18
Blade Materials – 440c Stainless steel
Handle Materials – Brass with Karabao Horn Inserts
Overall Length – 24cm
Blade Length -12cm
Weight – 175g
Bundok Philippine Visayan D2 Steel Blade Butterfly Balisong Knife USA Made Gift For Him With Stag Horn Handle BF-121
The Visayan islands developed their own reading of the balisong - longer and narrower than the Batangas standard, and lighter in hand than the length suggests.
Blade Materials – D2 Tool Steel
Handle Materials – Brass with stag horn
Overall Length – 29cm
Blade Length -14cm
Weight – 200g
Buwan Handmade Karambit Balisong Butterfly Knife | High Polished Blade | Buffalo Horn Handle with Brass Bolsters and Leather Sheath BF-173
Black horn, brass bolsters, mirror polished blade and a steel ring. The most traditional set of materials we put on the least traditional shape in the range.
Blade Material – High Carbon Steel, high polished
Handle Material – Buffalo Horn with brass bolsters, finger ring
Overall Length – 24 cm
Blade Length – 12 cm
Hardness – 58-60 HRC
Sheath – Fitted leather, included
Cat Handmade 440C Stainless Steel Original Filipino Balisong Butterfly Knife with Brass and Bone Handle | 24cm EDC Flipper Gift for Him | BF-19
Blade Materials – 440c Stainless steel
Handle Materials – Brass with Bone Inserts
Overall Length – 24cm
Blade Length -12cm
Weight – 175
Caterpillar Handmade 440C Stainless Steel Original Filipino Balisong Butterfly Knife with Brass and Bone Handle | 29cm Full Size Collector Gift | BF-20
Blade Materials – 440c Stainless steel
Handle Materials – Brass with Bone Inserts
Overall Length – 29cm
Blade Length -14cm
Weight – 220g
Does the finish on a high carbon blade change how it patinas?
It does, and it is the question nobody asks until the knife arrives and starts changing colour in a way they did not expect. The description above covers the difference between patina and rust. This part is about the surface the patina grows on. Two blades of the same carbon steel can age very differently depending on whether the maker left them mirror polished, satin, straight from the forge or coated. On most of this shelf the title does not name the finish, but on the 18 karambit and kitchen pieces it does, so we can show you exactly what you would be choosing between.
| Blade finish named in the title | Knives | Product codes | How patina tends to show |
|---|---|---|---|
| High polished | 9 | BF-163, BF-166, BF-170, BF-171, BF-173, BF-174, BF-177, BF-178, BF-183 | Shows every fingerprint and colour change first |
| Forge finished | 5 | BF-165, BF-169, BF-172, BF-182, BF-185 | Dark surface already, patina blends in |
| Satin polished | 2 | BF-181, BF-186 | Soft grey, the most even of the bare finishes |
| Black coated | 2 | BF-175, BF-180 | Flats protected, only the bare edge bevel patinas |
High polish: beautiful, and honest about everything
A mirror polished carbon blade is the most striking thing on the shelf the day it arrives and the most revealing a week later. Smooth steel has fewer tiny pits for moisture to sit in, which helps. But every change in colour is visible, so a thumbprint left overnight can show as a thumbprint shaped mark. If that bothers you, either wipe the blade every time you handle it or deliberately build an even patina early, before random marks do it for you.
Forge finish and satin: the forgiving surfaces
A forge finished blade keeps some of the dark scale from the fire on its flats. It looks rugged on day one and it hides the blotchy early stages of patina almost completely. Keep it lightly oiled, because the textured surface can hold moisture in its low spots. Satin sits between the two: brushed lines break up the reflections, so patina reads as a soft, even grey rather than a map of where your fingers went.
Black coated: the coating does the work
On a coated blade the flats are sealed. The edge bevel cannot be coated, since sharpening removes it, so that thin strip of bare steel is the only part that will patina or rust. Wipe the edge after cutting anything wet and you have very little else to do. Expect the coating to wear at the spine and near the pivot over years of use. That is honest wear, not a defect.
Building an even patina on purpose
Clean the blade with soap and hot water so no oil remains. Wipe it with a cloth dampened with white vinegar, or cut a few lemons or apples, then rinse, dry and repeat until the colour is even grey. Stop at grey. Then oil it lightly. If orange spots appear at any stage, that is rust: rub them off with fine steel wool and a drop of oil, and the patina will fill back in. Our rust and care guide covers storage in detail.
The patina story applies fully to the plain carbon blades, the BF-56 to BF-77 series plus these 18 pieces. The 440C and D2 knives on this shelf resist corrosion far better and barely patina at all. Compare them in the 440C collection or browse karambit balisongs by finish.
Patina and finish questions
Which blade finish hides patina best? Forge finished. The dark scale from the fire already covers the flats, so the patchy early stages of patina barely show. On this shelf that is BF-165, BF-169, BF-172, BF-182 and BF-185.
Does a black coated blade rust? The coated flats are protected. The sharpened edge bevel is bare steel, so wipe it after cutting anything wet and give it a thin film of oil now and then.
Can I remove patina from a high polished blade? Yes, with metal polish and patience, and it will return with use. Most owners stop fighting it and let an even patina protect the steel instead.
Is it safe to force a patina with vinegar? Yes, on plain carbon steel, if you stop at an even grey and then rinse, dry and oil the blade. Leaving it in vinegar for hours can etch the surface more than you want.
How do I tell patina from rust? Patina is grey, blue or dark and smooth to the touch. Rust is orange or red, feels rough and can flake. Remove rust promptly with fine steel wool and oil.
Will my 440C or D2 knife from this shelf patina? Hardly. Both resist corrosion far better than plain carbon. D2 can freckle if stored damp, and 440C is stainless.
About our balisongs
The balisong began in Batangas, in the Philippines, and every knife in this collection is made in that tradition. Our knives are made by Filipino artisans and metalworkers, many from families with generations of experience, now working in the United States.
Blades are ground in 440C stainless, D2 tool steel, VG10, high carbon and Damascus steel. Handles are fitted in kamagong ebony, carabao horn, Philippine deer horn and bone, and every knife ships with a fitted leather sheath. Both live blades and trainers are offered.
Before a knife leaves the bench it passes a four-step quality process: detailed hand inspection, smoothness and pivot testing, blade alignment checks, and durability and finish quality control. If a knife doesn't meet our standards, it never reaches our customers.
Most orders ship in 1 to 3 business days and arrive in 4 to 8 business days across the USA, or 8 to 14 business days internationally. Out of stock knives are handcrafted to order in 2 to 3 weeks, and every order ships worldwide with tracking.























